Maintaining Electric Garage Doors

There is a lot of maintenance that goes into having an electric garage door in Hove. You have to make sure that the door operates, that the tracks are in good working order, and that everything will run smoothly on your electric garage door in Hove. You do not want to find out one day that you are running late for work that your vehicle is stuck in the garage because the electric garage door in Hove will not open for you. Here are some things that you can do in order to maintain your electric garage door in Hove so that it will work all the time for you.

Door Operation

There are several things that you are going to want to look at to see if the doors operation is correct. You will want to start by seeing if the door is balanced in order to check for a smooth operation. You should check the manual that came with the door to see exactly how to do this on your electric garage door. You can then see if there are any misaligned tracks with the door. If there are it is a good idea to tighten the tracks either at the opening or at the brackets. Once this is complete you should take a soft brush and clean up the tracks so they run smoothly.


You will want to test and make sure that all safety measures on your electric garage doors are in pace. You can do this by opening up the door and placing something right below where the door would usually come down. If you push close on the door and your electric garage door does not reverse as soon as it touches the object that you placed there, you will want to look at your manual to see how to adjust this safety feature.


If something seems to be wrong with your electric garage door you can always try to troubleshoot the problem on your own first. You should first start and reset the door by turning off the power and then turning it back on. You will want to take the time to check any wiring that goes to the opener while the electricity is off. A good way to do this is to find a voltmeter to check the electricity that goes between the two, especially if you are not seeing anything wrong with the wiring. If everything looks good with the wiring it might be something else with the door, and you should consider replacing either the opener or the main board in order to get it fixed. You will need a professional to come out and help you with this project.

Leave a Reply

Your email address will not be published. Required fields are marked *