Having an HVAC system installed in the home is more than just a convenience, it can be a blessing as well. Heat in the winter and cool air in the summer is something many people take for granted. That is until something goes awry after an HVAC System Installation in Bellingham WA and it ceases to work properly. Here are some troubleshooting tips to try and fix the problem before calling in the pros.
Lack Of Power
If the unit simply will not turn on, it could be one of a few things. It could be something as simple as a trip in the circuit breaker or a blown fuse. On the other hand, it could also be trouble in the internal wiring system. While the former can be solved by any homeowner, the latter should involve a technician to come in and investigate the HVAC System Installation in Bellingham WA.
There are two types of thermostats commonly used. There are the manual ones and the more modern programmable ones. Each can run into their own sets of issues. If the unit powers on but there is still no change in temperature, it is time to check the thermostat. If it is a manual model, it may need to be recalibrated. This should be done by a licensed technician. If the thermostat is programmable, check with the owner’s manual to ensure it has been programmed properly. Very often there is a simple setting which can be changed by the homeowner without having to call in a repairman.
Some Are, Some Aren’t
If some of the rooms are experiencing temperature change while others are not, it could mean the ducts are dirty. This means a technician should be called in because the typical homeowner will not know enough to inspect the duct system in a proper fashion. Even if it is found to be not dirty, it may still have small tears in the ducts which can lead to leaking air.
Visit Lyndensheetmetal.com to have an HVAC system properly installed. They can also inspect the system afterward if problems develop in the system after use.